2202777

Emergency Eye Wash and Shower Testing to AS 4775:2026 in Central Queensland

Mon, 19 Oct 2026 23:38:34 GMT

An emergency shower is one of those bits of kit nobody thinks about until they need it. Then, with a splash of caustic down their front, they want two things: plenty of clean water, and no surprises. A shower that coughs out a dribble of rusty brown water is not the surprise anyone is after.

That is why RPS Fire now tests emergency eye wash stations and safety showers to the new AS 4775:2026 standard. We have the calibrated test equipment and qualified people to check that your units actually do their job, and the paperwork to prove it.

What is AS 4775:2026?

AS 4775 is the Australian Standard for emergency showers, eye wash and eye/face wash equipment. It sets out how the equipment should perform, where it should be installed, and how it should be maintained and tested.

The previous version, AS 4775-2007, had been in place for nearly 19 years. It was replaced in June 2026 by AS 4775:2026, now titled Emergency shower, eyewash and eye/face wash equipment and drench hoses. Changes flagged during the public consultation included guidance on sizing for users with a disability, the materials used in plumbing components, and the design and manufacture of metal and plastic parts.

In plain terms: the rules got a long-overdue update, and the testing needs to match. If your last report still quotes the 2007 standard, it is worth having a fresh look.

Does your workplace need emergency eye wash or shower equipment?

If your people handle chemicals that can burn, irritate or damage eyes and skin, the answer is very likely yes. Under Queensland work health and safety law, businesses must manage the risks from hazardous chemicals, and emergency showers and eye wash stations are one of the most common controls. Around Central Queensland we see them at:

Mine sites, workshops and wash bays
Water and wastewater treatment plants
Pool plant rooms and chemical stores
Agricultural chemical and fertiliser stores
Battery charging areas
Laboratories, schools and hospitals
Food processing and meatworks

Your safety data sheets are a good place to start. If they say "flush eyes with water for at least 15 minutes", you need something better than the tap in the lunch room.

What does an RPS Fire eye wash and shower test involve?

We don’t just pull the handle, watch it splash and tick a box. Every unit is tested and measured against AS 4775:2026.

Eye wash and eye/face wash units

We use a calibrated eyewash gauge to check the spray pattern. The water needs to cover both eyes at the same time, at the right height and width, with a gentle flow. Too weak and it won’t flush the eyes properly. Too strong and it can do more harm than good. We also check the dust covers, the push or pull activation, and that the valve stays open on its own so the user has both hands free to hold their eyes open.

Safety showers

For showers, we use a flow test sock that directs the full flow into a calibrated test bin. We time it on the spot to measure the actual flow rate in litres per minute. That beats "she looks about right" every time, and it means no one on your site gets drenched (except sometimes our technician).

Everything else that matters

Water temperature. The standard calls for tepid water. In a Central Queensland summer, a supply pipe running across a tin roof can deliver water hot enough to cook prawns. We check it.
Activation. Valves must open quickly and stay open without the user holding them.
Location and access. The unit needs to be easy to reach, with a clear path. A pallet of drums parked in front of the shower is a fail.
Signage, lighting and drainage. People need to find it fast, see it at night, and not slip over once it is running.
Condition. Corrosion, blocked heads, leaks, damaged pull rods and missing parts.
Records. Each unit is tagged, and you receive a written report listing results and any defects.

How often should eye wash stations and safety showers be tested?

For plumbed units, weekly activation by your own staff has long been the rule. It flushes out stale water and confirms water actually reaches the head. Keep a simple log; it takes 30 seconds and saves a lot of explaining after an incident.

On top of that, a full inspection and flow test against the standard should be carried out at least once a year by a competent person. That is the part we take off your hands.

Common faults we find

After years of testing, the same problems pop up again and again:

Low flow from partly closed isolation valves or blocked shower heads
Eye wash streams that hit the forehead instead of the eyes
Hot water from exposed pipework, especially in summer
Missing or broken dust caps
Access blocked by stock, bins or equipment
Faded or missing signage
No record of weekly activation

Most of these are cheap and quick to fix. Finding them during a test is far better than finding them during an emergency.

Why choose RPS Fire for eye wash and shower testing?

RPS Fire is a licensed fire protection provider (QBCC Licence No. 1245534) and has worked across Central Queensland since 2012. Our multi-disciplined team includes licensed plumbers, so if a unit needs repairs, the same team can fix it. No juggling contractors.

If we already service your fire equipment, we can test your eye wash stations and showers in the same visit. One booking, one invoice, one less job on your list.

We service sites across Central Queensland, including Barcaldine, Biloela, Blackall, Blackwater, Emerald, Gladstone, Longreach, Monto, Moura, Rockhampton and Yeppoon.

Frequently asked questions

Do I have to replace my equipment because of the new standard?

Not necessarily. Plenty of existing units will still perform well. We test what you have, tell you how it measures up against AS 4775:2026, and recommend work only where it is actually needed.

Can my staff do the testing themselves?

Your staff should carry out the weekly activation. The annual flow test and inspection needs calibrated equipment and someone who knows the standard, which is where we come in.

What about portable or self-contained eye wash units?

These need checking too, including fluid levels and expiry dates. We can include them in the same visit.

Want to know where the rest of your building stands? Read how to schedule a fire safety audit , or check our fire safety FAQs .

Not sure if your eye wash stations and showers would pass? Call RPS Fire on 07 4939 5597 or email admin@rpsfire.com.au to book an AS 4775:2026 test for your Central Queensland site.

Annual Occupier's Statement in Queensland: What Central Queensland Building Owners Need to Know

Fri, 09 Oct 2026 01:55:42 GMT

Nobody enjoys opening a notice of inspection from the Queensland Fire Department. It sits somewhere between a tax audit and a flat tyre on the Bruce Highway. A large Rockhampton service company got one recently, and further down we'll show you how we got them ready.

Most of the time, though, the paperwork that gets people into trouble is simpler: the Annual Occupier's Statement. If your building has fire safety equipment, someone has to sign it every 12 months. Here's what it is, who signs it, when it's due, and how to get it right first time.

What is an Annual Occupier's Statement?

It's a yearly declaration to the Commissioner of the Queensland Fire Department (QFD) confirming that every prescribed fire safety installation in your building has been properly maintained over the past 12 months. That covers things like extinguishers, hose reels, hydrants, sprinklers, fire alarms, exit signs, emergency lighting and fire doors.

The rules are in section 55A of the Building Fire Safety Regulation 2008 and Queensland Development Code (QDC) MP 6.1. The form itself is Schedule 2 of MP 6.1. It lists each installation, the standard it's maintained to (usually AS 1851, or AS/NZS 2293.2 for emergency lighting), whether any critical defect notices were issued during the year, and when they were fixed.

Does it apply to your building?

If you run a commercial, industrial, retail, accommodation or multi-unit residential building with fire safety equipment, almost certainly yes. There are two main exceptions:

Houses (class 1a) and their sheds and garages aren't covered.
Buildings treated as part of a coal mine or mine under Queensland's mining safety laws are excluded from MP 6.1's maintenance rules. They're managed under mining legislation instead.

That second one matters in the Bowen Basin. A building on the mine lease may sit under mining law, but your office, workshop or depot in Emerald, Moura or Blackwater almost certainly doesn't. If you're not sure, ask us before you assume you're exempt. "I thought it didn't apply" isn't a great conversation to have with an inspector.

Who is responsible, and who can sign?

The occupier is responsible. Under the Fire Services Act 1990 that's the owner, the tenant, the person in charge of the premises, or anyone managing it or running a business from it. In practice:

Tenant: responsible for the installations it maintains under its lease. In multi-tenant buildings, the owner or body corporate usually looks after shared systems like hydrants, sprinklers and the fire panel. Check your lease so nothing falls through the gaps.
Owner-occupied: the owner.
Vacant building: the owner.
Body corporate: the committee decides who is authorised to sign for it.

The statement can be signed by the occupier or by someone they authorise, such as a director, manager, committee member or their appointed Fire Safety Adviser. Your fire contractor can do the legwork. Just remember that authorising someone else to sign doesn't hand over the legal responsibility. That stays with the occupier.

When is it due, and where do you send it?

There's no single statewide date. Your first statement is due within one year of moving in, and each one after that within one year of the last. From the due date you have 10 business days to send a copy to the QFD Commissioner, by email to occupier.statements@fire.qld.gov.au or through your regional QFD office. Keep a copy with your maintenance records for at least two years.

Not sure of your date? Check your last statement. If you've just taken over a building, the previous occupier must hand over the fire safety records within one month of leaving, so chase them up. If you can't find any statement at all, treat it as overdue and start now.

What records do you need before you sign?

The statement is only as good as the records behind it. Before you sign, make sure you have:

Service records for the full year, each showing the installation, the technician's name and licence number, the date, what was done, the results and any repairs
The AS 1851 annual condition report
Form 72 (periodic testing and maintenance) for hydrants and sprinklers, which your contractor must give you within 10 business days of the work
Every critical defect notice from the year, with proof it was fixed, such as a rectification report or invoice

You also need a copy of your records kept in the building and another somewhere secure off site. An electronic copy is fine as long as you can get to it easily. If a record is missing, you can't honestly declare that installation was maintained.

Your whole year in one place: the RPS Fire client portal

Every RPS Fire client gets access to our online client portal, built on Uptick, the fire protection software used by hundreds of fire companies across Australia and New Zealand. Instead of digging through a filing cabinet, an inbox or the glovebox of the ute, everything you need before signing your statement is in one place, any time:

A year-at-a-glance view of your routine servicing, showing what's been completed, what's coming up, and anything done late or still overdue
A defect register showing every open and resolved defect, sorted into critical, non-critical and non-conformance, so you can see straight away whether anything is stopping you from signing
Defect quotes you can review and approve online, which helps you get repairs done inside the one-month window
Your service reports and documents, ready to view or download, plus monthly maintenance reports
For clients with several sites, a map of all your properties, colour-coded by the most serious open defect at each one

Because your records are stored securely online and easy to get to, the portal also covers the requirement to keep a copy of your fire safety records somewhere other than the building. If QFD walks in, you can pull up a full year of records in minutes.

Can you lodge with unresolved critical defects?

No. Fix them first. A critical defect is one likely to stop an installation working and put people at serious risk in a fire, like a failed hydrant pump or a fire alarm system that's down. One faulty extinguisher among several usually isn't one. Your technician must give you a critical defect notice within 24 hours of finding it.

The statement asks for the date each critical defect was fixed, with the notices and proof of repair attached. Signing while one is still open means declaring something that isn't true.

Other repairs found during maintenance must be done within one month, unless you have a reasonable excuse. The regulation's own examples are a remote site no qualified person could get to, and complex work or waiting on parts. Both happen in Central Queensland, so if they apply to you, write down the reason and talk to us well before your due date.

What happens if you get it wrong?

Failing to prepare, keep or lodge the statement carries a maximum penalty of 20 penalty units each, currently $3,454. The maintenance failures that usually sit behind a missing statement carry up to 30 penalty units ($5,181). QFD officers can audit buildings and issue on-the-spot fines.

The bigger risk is under the Fire Services Act 1990, which requires occupiers to keep all prescribed fire safety installations maintained at all times. The penalty is up to 100 penalty units ($17,270) for a standard breach, rising to 2,000 penalty units or three years' jail if a failure contributes to multiple deaths. Company executives can also be held personally liable.

And after a fire, your insurer will ask for your maintenance records. Gaps can make a claim much harder.

Case study: from notice of inspection to inspection-ready

A large Rockhampton-based service company came to us after being served a QFD notice of inspection. The occupier's statement was only part of it. An inspection looks at the whole picture: staff training, fire wardens, evacuation practice and the maintenance records behind every installation.

Graham Read, our Fire Safety Adviser , has spent 30 years with QFD and in the fire industry, so he knows exactly what an inspector looks for. Within four weeks he had taken the site through the entire process:

Trained every staff member on site in General Evacuation and First Response Instruction (GEFRI)
Trained the site's fire wardens
Completed a full fire safety audit of the site's installations and records
Wrote the site's emergency plan, covering the fire and evacuation plan Queensland law requires
Chaired the emergency planning committee and prepared the minutes
Run the annual evacuation practice, which must be held and recorded at least every 12 months
Put all the fire safety documents in order, ready for QFD

Four weeks, from a notice on the desk to a site ready for inspection. Graham will be on site with the client when QFD inspects, and he's been appointed the site's Fire Safety Adviser for the next 12 months. Their next statement, training and evacuation are already planned, not left to a mad scramble.

The lesson: it's a lot easier, and cheaper, to have this sorted before the notice turns up. If one has already landed, call us straight away. You can also read more about fire safety training for staff .

How RPS Fire helps

We make the statement the easy part by getting the year's work right:

Scheduled AS 1851 servicing across all your installations, so nothing is missed
Complete records with technician names, licence numbers, results and repairs, plus Form 72 for hydrants and sprinklers
Fast repairs by our own multi-disciplined team, covering water-based systems, fire alarms and detection, emergency and exit lighting, special hazard suppression, passive fire and portable equipment, so you're not waiting on a second contractor
Reminders before your due date, with the statement prepared and ready to sign
24/7 access to your records, defects and quotes through our client portal
Fire Safety Adviser services: with 30 years across QFD and the fire industry, Graham can audit your full year of records and, where you authorise him, sign the statement for you. He can also be appointed as your ongoing FSA, covering GEFRI, fire warden training, evacuation practice and your annual statement.

RPS Fire is a licensed fire protection provider (QBCC Licence No. 1245534), licensed across every fire protection class: water-based, fire electrical, emergency lighting, special hazard, passive and portable. We have worked across Central Queensland since 2012, including Barcaldine, Biloela, Blackall, Blackwater, Emerald, Gladstone, Longreach, Monto, Moura, Rockhampton and Yeppoon.

Due for a deeper check? Read what happens during your 5-year fire safety compliance inspection , or find out how to schedule a fire safety audit if you're not sure where your building stands. Got another question? Our fire safety FAQs cover servicing, training and equipment hire.

Not sure when your statement is due? Send us your building address and we'll check it for you, free. Received a QFD notice of inspection? Call us today. Phone 07 4939 5597 or email admin@rpsfire.com.au .

5 Yearly Fire Hydrant & Sprinkler Compliance Testing (AS1851)

Sun, 20 Sep 2026 00:12:29 GMT

What Are the Best Fire Safety Training Options for Staff?

Tue, 08 Sep 2026 23:43:43 GMT

The right training depends on the role: general evacuation instruction for all staff, and formal Emergency Control Instruction for anyone on your Emergency Control Organisation. Equipment alone doesn't prepare people — staff also need to understand the procedures that apply to them and how to respond when an emergency occurs.

RPS Fire provides tailored workplace fire safety training, Fire Safety Adviser services and first response training, so training can be considered alongside the workplace's broader fire safety arrangements rather than as a standalone exercise.

Start With Training That Matches Your Workplace

A small office and a large industrial site don't have the same fire safety requirements, so training shouldn't follow a one-size-fits-all approach. Before organising anything, it's worth considering the workplace layout, evacuation arrangements, the fire systems already installed — including hydrants, fire hose reels, sprinklers and alarms — and the responsibilities assigned to staff.

RPS Fire's training is tailored accordingly, with sessions focused on practical knowledge and helping staff respond confidently and effectively during an emergency.

General Evacuation and First Response Instruction

Evacuation and first response instruction is an important area for Queensland workplaces. RPS Fire provides General Evacuation First Response Instruction (GEFRI) and first response training through its Fire Safety Adviser package, which also includes emergency evacuation diagrams, evacuation procedures and fire safety reports.

Bringing these elements together connects staff instruction with the procedures and documentation used at the workplace, rather than leaving training disconnected from what happens on the day.

Fire Warden Training and Your Emergency Control Organisation

Not every staff member needs the same level of training. GEFRI is intended for all occupants, but Fire Warden Training — formal Emergency Control Instruction (ECI) — is specifically for members of a workplace's Emergency Control Organisation (ECO). GEFRI can sometimes be delivered internally where an employer can demonstrate staff have been adequately instructed, but ECO members require formal instruction suited to their role.

Whether a workplace needs an ECO depends on factors including the building's size, its occupancy, the risks present, and the complexity of evacuating it. Where one is required, the number of wardens needed depends on the number of occupants, the number of floors, the building layout, and operational risks — there's no single figure that applies to every site.

Fire Wardens are typically responsible for:

Sweeping designated areas
Directing occupants
Assisting mobility-impaired persons
Ensuring areas are clear
Reporting to the Chief Warden

The Chief Warden's role covers:

Coordinating the overall emergency response
Liaising with emergency services
Making evacuation decisions
Controlling communications during an emergency

RPS Fire provides Fire Warden Training tailored to these roles, ensuring your ECO is prepared to carry out its responsibilities effectively.

Combine Training with Evacuation Planning

Training becomes more useful when staff can relate what they've learned to the procedures that apply at their own workplace. RPS Fire's Fire Safety Adviser service, overseen by Graham Read (FSA 1452678-9500915), includes emergency evacuation diagrams, evacuation procedures, fire safety reports and first response training — giving businesses a way to consider staff preparedness alongside their documented emergency arrangements.

Under Queensland's Building Fire Safety Regulation 2008 , certain workplaces — including high-rise buildings and sites with 30 or more workers — are required to appoint a qualified Fire Safety Adviser.

Why Does Practical Knowledge Matter?

Reading a procedure is different from being prepared to act during an emergency. RPS Fire's training emphasises hands-on experience and practical knowledge, designed to help staff understand how to respond confidently if an emergency occurs.

This reflects RPS Fire's wider approach to fire safety. Its licensed team — RPS Fire holds QBCC Licence No. 1245534, and every employee carrying out this work holds the appropriate licence for the job — installs, maintains and certifies systems including hydrants, fire hose reels, sprinklers, pumps, suppression systems and portable fire equipment, all maintained to AS1851 . That technical experience means businesses can access fire safety services and staff training through the same Central Queensland provider.

How Do You Choose a Fire Safety Training Provider?

When assessing training options, it's worth looking beyond a generic package. Consider whether the provider understands the systems installed at your workplace, and whether they can connect training with your evacuation procedures and wider fire safety arrangements.

RPS Fire has worked across Central Queensland since 2012, servicing Barcaldine, Biloela, Blackall, Blackwater, Emerald, Gladstone, Longreach, Monto, Moura, Rockhampton and Yeppoon.

Conclusion

The best workplace fire safety training is relevant to the people, procedures and fire protection measures at the individual site. RPS Fire offers tailored practical training and first response instruction alongside Fire Safety Adviser services and fire system expertise. Businesses should speak with the team about their workplace, staff and existing systems to establish the most appropriate training option.

What Fire Prevention Systems Should Your Business Invest In?

Tue, 08 Sep 2026 23:39:28 GMT

Most commercial buildings need a combination of systems working together, not a single product — typically extinguishers, hydrants and fire hose reels, sprinklers, alarms, emergency lighting and passive protection, all serviced to AS 1851, the Australian Standard for fire protection servicing.

The right combination depends on the building and what it's used for. RPS Fire completes, installation, commissioning, servicing, maintenance and certification for businesses throughout Central Queensland. At a glance, the main systems worth considering are:

Fire extinguishers and portable fire equipment
Fire hydrants and fire hose reels
Automatic sprinkler systems
Fire detection and alarm systems
Exit and emergency lighting, and evacuation planning
Passive fire protection and fire doors

Fire Extinguishers and Portable Fire Equipment

A fire extinguisher is one of the most recognisable pieces of workplace fire equipment, and RPS Fire supplies and maintains extinguishers alongside fire blankets and other portable equipment.

Portable equipment should be treated as one part of a broader fire safety strategy, not a stand-in for it. What matters longer term is the quality of the equipment, how well it's positioned for the building, and whether it's kept in serviceable condition — which is why ongoing maintenance and clear reporting matter as much as the initial purchase. Under AS1851, extinguishers require a 6-monthly inspection and tag, with pressure testing every 5 years — reduced to every 3 years in aggressive or corrosive environments.

Do Hydrants and Fire Hose Reels Need Separate Servicing?

Automatic Sprinkler Systems

Yes. For properties with a wet fire system, hydrants and fire hose reels can be a significant part of the building's fire protection infrastructure, and RPS Fire designs, installs and services both — but treats each as its own item. A hydrant system being present doesn't mean hose reels are automatically covered, and vice versa.

Capabilities here also extend to fire pump and tank installations and specialised flow-testing equipment. Hydrant and sprinkler systems are certified under a Form 71 when commissioned and Form 72 for periodic testing and maintenance, the standard Queensland certification for water-based fire safety installations. Under AS1851, hydrants need a 6-monthly visual and condition check, an annual flow test, and 5-yearly booster flow and hydrostatic testing; fire hose reels need a 6-monthly visual inspection, an annual flow test.

Automatic sprinkler systems add another layer of protection, and RPS Fire provides sprinkler installation and maintenance as part of its broader wet fire services. Design and construction packages are scoped to the project, so sprinkler protection is planned in as part of the building's infrastructure rather than added as an afterthought.

New hydrant and sprinkler systems are commissioned on Form 71, and ongoing testing and maintenance is recorded on Form 72 — the Queensland forms required under QDC MP 6.1 for water-based fire safety installations — giving you documented proof that these specific systems meet requirements. Under AS1851, sprinkler systems need monthly valve and gauge checks, 6-monthly valve assessments, an annual full functional test, a 5-yearly comprehensive assessment, and 25-yearly sprinkler head sampling.

Fire Detection and Alarm Systems

Early warning is another essential part of a fire safety system. RPS Fire installs and maintains fire detection and alarm systems, which work alongside extinguishers, sprinklers, hydrants and hose reels, and emergency planning as part of a coordinated approach to workplace fire safety. Under AS1851, these systems need monthly panel checks, 6-monthly circuit and alarm testing, an annual full functional test, and a 5-yearly battery and cable inspection.

Exit and Emergency Lighting, and Evacuation Planning

Fire protection also has to get people get out safely. RPS Fire assists with exit and emergency lighting, evacuation plans and procedures, and evacuation diagram reviews to confirm they're current and correctly displayed. Under AS2293, exit and emergency lighting needs a 6-monthly discharge test, confirming battery backup lasts the full rated duration (typically 90 minutes).

RPS Fire's Fire Safety Adviser service includes emergency evacuation diagrams, evacuation procedures, fire safety reports and first response training — connecting the physical equipment installed in a building with the knowledge staff need to use it in an emergency.

What Is Passive Fire Protection?

Not every fire protection measure is active equipment. Passive fire protection includes building elements like fire doors, which RPS Fire installs and maintains as part of its service range — elements that should be reviewed alongside active systems like alarms and sprinklers, not considered separately from them. Under AS1851, fire doors need a 6-monthly visual inspection and close test.

Why Does Ongoing Maintenance Matter?

Investing in fire protection doesn't end once equipment is installed. Under AS1851, systems need to be inspected, tested and serviced on an ongoing basis to stay compliant and to keep performing when needed.

RPS Fire is a licensed fire protection provider (QBCC Licence No. 1245534) and has worked across Central Queensland since 2012. Licensing isn't limited to the business — All work is carried out or supervised by appropriately QBCC-licensed technicians. For businesses managing several systems — extinguishers, hydrants, hose reels, sprinklers, alarms and passive protection — working with one accountable, fully licensed team can make ongoing compliance considerably more straightforward.

Conclusion

There's no single product that replaces a properly planned fire protection system. Most commercial buildings rely on some combination of extinguishers, hydrants, hose reels, sprinklers, alarms, emergency lighting, passive protection and evacuation procedures.

The important step is working out what's appropriate for your property, and then keeping it maintained to AS1851 over time — not treating installation as a one-off task.

If your Central Queensland business needs a new fire extinguisher, hydrant, hose reel or sprinkler system, or you want to discuss maintenance for existing fire protection equipment, contact RPS Fire on 07 4939 5597 or admin@rpsfire.com.au . RPS Fire services Barcaldine, Biloela, Blackall, Blackwater, Emerald, Gladstone, Longreach, Monto, Moura, Rockhampton and Yeppoon.

How to Schedule a Fire Safety Audit for Your Commercial Building

Tue, 08 Sep 2026 23:31:31 GMT

Scheduling a fire safety audit starts with contacting a licensed provider who reviews your building's installed systems, tests them against AS 1851 — the Australian Standard governing fire protection servicing — and reports on where you stand.

For businesses across Central Queensland, that audit is the starting point for compliance. It gives you a clear, picture of what's installed, what condition it's in, and whether it meets your obligations, before a problem shows up during an emergency or an inspection.

What Does a Fire Safety Audit Cover?

A proper audit looks at the building's fire protection arrangements, not just one piece of equipment in isolation. Depending on the property, that typically includes:

Fire hydrants and fire hose reels
Automatic sprinkler systems
Fire extinguishers and fire blankets
Fire detection and alarm systems
Exit and emergency lighting
Passive fire protection and fire doors
Fire pumps and tanks
Evacuation diagrams and procedures, checked for currency, correct display, and accuracy against the building's layout

Before the audit, it helps to have any existing service records, building plans or previous reports on hand — this gives the assessor useful context and can speed up the process.

What Will You Receive After the Audit?

A proper audit produces more than a verbal opinion. You can expect:

A written report setting out what was found
Clear recommendations on anything that needs attention
Certification specific to hydrant or sprinkler systems where applicable, such as a Form 72.

Audits are overseen by Graham Read, RPS Fire's Fire Safety Adviser (FSA 1452678-9500915). Graham has over 30 years' experience in the fire industry.

RPS Fire is a licensed fire protection provider (QBCC Licence No. 1245534) — so the audit, any certification, and the maintenance work that follows are all handled by the same accountable team.

How Do You Book a Fire Safety Audit?

Contact RPS Fire and let us know a bit about the property — its location, the type of building, and what fire systems are already installed. You can:

Call 07 4939 5597
Email admin@rpsfire.com.au
Use the contact form on the RPS Fire website

If you're specifically concerned about hydrants, hose reels, extinguishers, alarms or evacuation planning, mention this upfront — it helps us scope the visit correctly from the start.

RPS Fire services businesses across Central Queensland, including Barcaldine, Biloela, Blackall, Blackwater, Emerald, Gladstone, Longreach, Monto, Moura, Rockhampton and Yeppoon.

Why Does Fire Safety Need Ongoing Maintenance?

An audit is a snapshot — it tells you where things stand today. Staying compliant to AS1851 means keeping up that inspection and maintenance cycle over time, not treating the audit as a one-off task. Frequencies vary by system — fire doors, for example, need a 6-monthly check, while hydrants are flow-tested annually with 5-yearly hydrostatic testing.

RPS Fire takes a proactive approach: installation, maintenance, certification, inspections and training, all handled by one licensed Central Queensland team, so your fire protection systems stay operational and aligned with the standards that apply to them.

Ready to review your commercial building's fire safety? Contact RPS Fire on 07 4939 5597 or admin@rpsfire.com.au to book a fire safety audit, hydrant inspection, or evacuation diagram review for your Central Queensland workplace.

Apprentice of the Year

Mon, 02 Mar 2026 11:32:20 GMT

Celebrating Our Team at the NFIA Christmas Lunch & Awards

I’m proud to share that Evan Daley has been awarded Regional Fire Protection Apprentice of the Year at the National Fire Industry Association (NFIA) 2025 Christmas Lunch and Awards.

This recognition is not only a testament to Evan’s dedication and hard work but also reflects the strength of our team and the culture we’re building together. At RPS Fire, we believe in investing in apprentices, supporting professional growth, and developing the next generation of fire protection specialists.

Congratulations, Evan — and to RPS Fire’s entire team for the passion and commitment you bring to the industry every day.

Thank you to Victaulic for sponsoring the award and the NFIA for organising a great day.

If you’re looking for a fire protection partner who values compliance, innovation, and people in Central Queensland, connect with RPS Fire today.

General Evacuation First Response Instruction (GEFRI)

Wed, 12 Nov 2025 11:32:20 GMT

Did you know?

Under the Building Fire Safety Regulations 2008, all staff must receive General Evacuation First Response Instruction (GEFRI) within two days of starting work and refreshed annually. This essential training ensures every worker knows how to raise the alarm, contact emergency services, locate exits and identify assembly areas – giving them the confidence to act quickly and safely.

How RPS Fire delivers this:

At RPS Fire, we understand that every facility operates differently. That’s why we tailor our GEFRI training to reflect your workplace’s specific layout, procedures and risk profile. Our experienced fire safety technicians don’t just tick compliance boxes – they create an interactive learning experience that helps your team feel empowered and prepared. We ensure your organisation meets all legal requirements while promoting a genuine culture of safety.

Fire Safety Adviser (FSA)

Tue, 02 Sep 2025 11:32:20 GMT

Did you know?

Under the Building Fire Safety Regulations 2008, certain workplaces – such as high-rise buildings and sites with 30 or more workers must appoint a qualified Fire Safety Adviser (FSA).

How RPS Fire delivers this:

RPS Fire provides fully accredited Fire Safety Adviser services across Central Queensland. Our team of fire safety professionals works closely with clients to maintain compliance, conduct regular audits and support emergency management planning. We take pride in being more than a compliance provider – we become your long-term fire safety partner. RPS Fire ensures your workplace is protected, your obligations are met and your staff remain informed and confident.

2202777

Emergency Eye Wash and Shower Testing to AS 4775:2026 in Central Queensland

What is AS 4775:2026?

Does your workplace need emergency eye wash or shower equipment?

What does an RPS Fire eye wash and shower test involve?

Eye wash and eye/face wash units

Safety showers

Everything else that matters

How often should eye wash stations and safety showers be tested?

Common faults we find

Why choose RPS Fire for eye wash and shower testing?

Frequently asked questions

Do I have to replace my equipment because of the new standard?

Can my staff do the testing themselves?

What about portable or self-contained eye wash units?

Annual Occupier's Statement in Queensland: What Central Queensland Building Owners Need to Know

What is an Annual Occupier's Statement?

Does it apply to your building?

Who is responsible, and who can sign?

When is it due, and where do you send it?

What records do you need before you sign?

Your whole year in one place: the RPS Fire client portal

Can you lodge with unresolved critical defects?

What happens if you get it wrong?

Case study: from notice of inspection to inspection-ready

How RPS Fire helps

5 Yearly Fire Hydrant & Sprinkler Compliance Testing (AS1851)

Why the 5-Year Test Is Different from an Annual Check

Why This Needs a Multi-Disciplined Team

What You Get at the End

Booking Your 5-Year Compliance Inspection

What Are the Best Fire Safety Training Options for Staff?

Start With Training That Matches Your Workplace

General Evacuation and First Response Instruction

Fire Warden Training and Your Emergency Control Organisation

Combine Training with Evacuation Planning

Why Does Practical Knowledge Matter?

How Do You Choose a Fire Safety Training Provider?

Conclusion

What Fire Prevention Systems Should Your Business Invest In?

Fire Extinguishers and Portable Fire Equipment

Do Hydrants and Fire Hose Reels Need Separate Servicing?

Automatic Sprinkler Systems

Fire Detection and Alarm Systems

Exit and Emergency Lighting, and Evacuation Planning

What Is Passive Fire Protection?

Why Does Ongoing Maintenance Matter?

Conclusion

How to Schedule a Fire Safety Audit for Your Commercial Building

What Does a Fire Safety Audit Cover?

What Will You Receive After the Audit?

How Do You Book a Fire Safety Audit?

Why Does Fire Safety Need Ongoing Maintenance?

Apprentice of the Year

Celebrating Our Team at the NFIA Christmas Lunch & Awards

General Evacuation First Response Instruction (GEFRI)

Did you know?

How RPS Fire delivers this:

Fire Safety Adviser (FSA)

Did you know?

How RPS Fire delivers this: